Custom vans  Mark III

     Mark III custom van parts   

East Coast Auto Toys NOW East Coast Custom Vehicles

email questions here lifetime logo for East Coast Custom Vehicles ®          Call Toll FreeToll Free        

 

Mark III custom vans parts are always available

seating electronics wood carpet lighting shades mark III

shades seating wood ac_parts graphics window shrouds center cap

Tiara, Glaval, parts,  custom vans by MARK III, running boards, Explorer

If you are going top have your van serviced please be advised that you must instruct the mechanic on the proper way to remove and reinstall your center caps.  The caps MUST be unscrewed with a hex or Allen key carefully.  These caps are quite brittle and if when reinstalled, the cap is to loose or too tight the cap will definitely break.  Dealers and shops have been known to try and unsnap the center cap from your rim, not realizing that there is a screw.  They have also told the customer that they are not responsible for the breakage if this does happen. Please take the time to educate your installer and you will save yourself a lot of grief and expense. If they have already broken your center caps, we always  have them in stock.

to view all pdf files get your free acrobat reader here

mark III 9b center cap

  9 "B" center cap

mark III 11b center cap

  11 "B" center cap

view wheels in pdf format

mark III 1b center cap

1 "B" center cap

mark III 9b center cap 

  9 "B" wheel   

  view pdf

 

mark III 11b wheels 

11"B" wheel

 view pdf

 

   

 1"B" wheel

 view pdf

mark III used 9 b wheels

used 9 b Ford van

11B wheel

 

11"B" wheel

9 "B" wheel

11"B" wheel & tire

custom vans

Just In!

9b wheels used  5 X 4 3/4 BOLT CIRCLE

Explorer Vans caps

Explorer Vans Center cap

2 left

04/08/2013

ALSO LOOK AT TAILS

 

Finally here 

for your safety and of course to pass inspection

THIRD BRAKE LIGHT LED REPLACEMENT

This light is 100 times brighter than your original, and will not rust and rot the way the original did.   small amount of filing is required for the installation. You will need to open the hole about one quarter inch in height to install this light. This light should last you for the lifetime of your Mark III or any other custom van.  It is DOT approved and will pass inspection for any and all states.

 mark III third brake lamp

    THIRD BRAKE LIGHT LED REPLACEMENT  

wall or rear door  air compressor mounts anywhere

air compressor in door or wall

side wall air compressor

 

Engine Trays

oak drink trays and storage to mount on your "dog house"

Available in any kind of wood to match your original interior. The most popular wood used in conversion vans is oak or walnut. Cherry or Brazilian walnut are also very popular.

All wood products are available in satin or high gloss finish and are custom made to order. Any wood that is custom made will take about two weeks. Snack trays, dash wood any many other trim pieces are always in stock. East Coast Custom Vehicles also stocks Dash kits which are also available for hundreds of types of cars.

Tire Carrier

Lighted Ladder

lighted and deluxe four step ladders and custom tire covers or tire carriers for all vans are always in stock

 

 Walnut Engine Drink Trays

Look here swingout cup holder insert

               Swing Out & Drop down Cup Holders

Air Conditioning parts GO here for the A/C link